Lighting A Pilot On A Wall Heater – How to light a gas wall heater step 1. Turn the gas control to pilot and hold it in while you light the flame with a match or a lighter. Turn the gas knob to the pilot setting press it in and hold it light the pilot while holding. Locate the the pilot so you will know where to put the fire when it is time to light the gas heater. Keep the knob in for 20 seconds and then release it and turn it to the on position. Locate tube that supplies the pilot light..
This is a 1 4 inch metal tube that originates near the main valve and.
Lighting a pilot on a wall heater. For some heaters you may have to completely remove the cover. If your old gas furnace has a standing pilot you can follow a standard procedure to relight the pilot light. Good life property manage.
However the pilot does create a small safety problem. Continue to apply pressure until you see the pilot light ignite and then for another. It s mainly the pilot that drives the whole system.
Mariah shows you how to light the pilot on a wall furnace. Function of pilot in gas wall heaters. Open the door of the heater to expose the burner.
When the gas is turned on the valve releases gas into the burner which ultimately lights up the stove. You light up the pilot to help it light up the burner. If your water heater has an ignitor press down simultaneously on the pilot valve and the red ignitor button.
Lighting A Pilot On A Wall Heater – If your water heater has an ignitor press down simultaneously on the pilot valve and the red ignitor button. You light up the pilot to help it light up the burner. When the gas is turned on the valve releases gas into the burner which ultimately lights up the stove. Open the door of the heater to expose the burner. Function of pilot in gas wall heaters. Mariah shows you how to light the pilot on a wall furnace..